- Our procedure guidelines are followed with the preparation and application methods for your patios new sealer application. This includes 2 trips to your project and a step by step clean and seal process.
- On trip one, the entire concrete surface will be extensively power washed and cleaned using a large industrial pressure washer with custom attachments to remove all accumulated dirt, flaking old top coat and surface contaminants on the concrete. After a 2-3 day drying period we will return to start the new top coat application process.
- Our patio sealing is the industry standard method of a power wash and seal. After a power wash of your patio we will return 2-3 days later to blow off and apply one coat of our DECO-GUARD low sheen clear patio sealer by spray application method. Our material will also include a micro-traction additive to help prevent a slippery when wet top coat surface. This plan will need to be done every year or two to keep your patio looking good and protected.
After your top coat process is complete we recommend that all pet and human foot traffic remain off you newly sealed surface for at least 6 hours. We also recommend a full 24 hours before putting any patio furniture or grills back onto your newly sealed surface. This allows for proper cure time. We always recommend a comprehensive maintenance plan to reseal your patio surface as needed to keep your investment looking great and in superb condition for years to come. Our patio sealing is guaranteed until the end of the application year against peeling and flaking. Any moisture issues after sealer application and proper drying are not under any warranty as NoCo Concrete llc. cannot control ground moisture levels in any given season. If topcoat whitening occurs it can be fixed with a return trip and additional small fee.